OTN 8200 Stackable DWDM Platform
Product Overview
The OTN 8200 is a next-generation 200G/400G compact DWDM transmission platform featuring ultra-low latency, high density, large-capacity transport, low power consumption, compact design, and simplified operations. It provides a powerful, flexible, and reliable all-optical connectivity solution for metro DWDM and data center interconnect (DCI) applications.
Built on an open software architecture, the OTN 8200 supports standard NETCONF/YANG interfaces for seamless integration into third-party network management systems.
Product Features
Flexible Hardware Architecture with Carrier-Class Reliability
- 2RU height design with 8 card slots, compatible with 1/4 and 1/2 size boards. Supports hybrid optical-electrical or pure optical configurations.
- 600mm-depth rack mounting with front-to-back airflow, compatible with AC 220V, DC -48V, and HVDC 240V power inputs for diverse installation environments.
- Redundant design for core control boards, power modules, and fan, supporting hot-swappable replacement.
High Integration and Large Capacity
- 200G/400G single-wavelength coherent modulation with flexible grid technology, achieving >38.4 Tbit/s per fiber.
- Supports hybrid optical-electrical configurations.
- Supports 48/96-channel MUX/DEMUX and 10G~100G service access
- ROADM/FOADM networking: 9D WSS ROADM + 4-channel TFF FOADM for flexible topology design
Green Energy-Efficient Design
- Front-to-back cooling for optimized airflow in cold/hot aisle deployments.
- 3+1 redundant fans with intelligent speed control
Carrier-Class Reliability
- Redundant core control boards, power supplies, and fans with hot-swap capability.
- Dual control boards, dual Ethernet management ports, dual IP addresses, and OSPF support.
- Electrical Layer device supports FEC encoding,QPSK,16QAM for extended transmission distance and system margin.
- Optical Layer device supports 1+1 optical protection (channel, multiplex section and line) and flexible ring/chain network topologies.
Flexible and Simplified Management and Maintenance
- NETCONF/YANG-based management with open interfaces.
- Management ports: 2×RJ-45 Ethernet, 1×RJ-45 cascade, 1×RJ-45 console.
- Supports DCN, OSC, and NM port cascading for centralized management.
- Supports Console,Telnet, SSH management.
- Supports the standard SNMP protocol, which can realize functions such as automatic device discovery, network topology management, device configuration management, performance data statistical analysis, and fault management, simplifying network management and providing users with a new experience
Service Board Specifications
400G TMUX
|
Items |
Specifications |
|
|
Board size |
1/4 slot |
|
|
Server side |
Client interface |
4×QSFP28 100G ports (max 32×100G per chassis) |
|
|
Type |
Supports 100GE/FlexE Unaware |
|
|
Ethernet Monitoring |
RMON: Packet/byte counts, port utilization, CRC errors |
|
|
Telemetry |
Ethernet performance, optical module power,bias current、 |
|
|
OAM |
Supports LLDP, latency measurement, loopback, and ALS Supports inserts Local Fault code to downstream sideways when Ethernet input loss or WDM side failure Supports transparent transmission of Local Faults and Remote Faults |
|
Line side |
Net interfaces |
1×400G CFP2 DCO coherent module (max 8×400G per chassis). |
|
|
Modulation |
400G:16QAM |
|
|
FEC |
400G:SD-FEC |
|
|
Tunable Wavelength |
191.3–196.1 THz, adjustable 75/100 GHz spacing. |
|
|
Laser Power |
Adjustable from -5 to 0 dBm (0.1 dB step). |
|
|
Telemetry |
Transceiver power, bit error rate (Pre-FEC), laser bias current, laser operating temperature, etc |
|
|
OAM |
Loopback and delay measurement |
|
|
Mapping path |
100GE->ODU4(GMP)->ODUC4->OTUC4 400GE->ODUflex(GMP)->ODUC4->OTUC4 |
200G TMUX-1
|
Items |
Specifications |
|
|
Board size |
1/4 slot |
|
|
Server side |
Client interface |
2×QSFP28 100G ports (max 16×100G per chassis) |
|
|
Type |
Supports 100GE/FlexE Unaware. |
|
|
Ethernet Monitoring |
RMON: Packet/byte counts, port utilization, CRC errors |
|
|
Telemetry |
Ethernet performance, optical module power,bias current、 |
|
|
OAM |
Supports LLDP, latency measurement, loopback, and ALS Supports inserts Local Fault code to downstream sideways when Ethernet input loss or WDM side failure Supports transparent transmission of Local Faults and Remote Faults |
|
Line side |
Net interfaces |
1×200G CFP2 DCO coherent module (max 8×200G per chassis) |
|
|
Modulation |
200G:16QAM or QPSK |
|
|
FEC |
200G:SD-FEC |
|
|
Tunable Wavelength |
191.3–196.1 THz, adjustable 75/100 GHz spacing |
|
|
Laser Power |
Adjustable from -5 to 0 dBm (0.1 dB step). |
|
|
Telemetry |
Transceiver power, bit error rate (Pre-FEC), laser bias current, laser operating temperature, etc |
|
|
OAM |
Loopback and delay measurement |
200G TMUX-2
|
Items |
Specifications |
|
|
Board size |
1/2 slot |
|
|
Server side |
Client interface |
20×SFP+ 10G ports (max 80×10G per chassis) |
|
Type |
Supports 10GE/OTU2/STM-64/10GE WAN. |
|
|
Ethernet Monitoring |
RMON: Packet/byte counts, port utilization, CRC errors |
|
|
Telemetry |
Ethernet performance, optical module power,bias current、 |
|
|
OAM |
Supports LLDP, latency measurement, loopback, and ALS Supports inserts Local Fault code to downstream sideways when Ethernet input loss or WDM side failure Supports transparent transmission of Local Faults and Remote Faults |
|
|
Line side |
Net interfaces |
1×200G CFP2 DCO coherent module (max 4×200G per chassis). |
|
Modulation |
200G:16QAM or QPSK |
|
|
FEC |
200G:SD-FEC |
|
|
Tunable Wavelength |
191.3–196.1 THz, adjustable 75/100 GHz spacing |
|
|
Laser Power |
Adjustable from -5 to 0 dBm (0.1 dB step). |
|
|
Telemetry |
Transceiver power, bit error rate (Pre-FEC), laser bias current, laser operating temperature, etc |
|
|
OAM |
Loopback and delay measurement |
|
200G TMUX-3
|
Items |
Specifications |
|
|
Board size |
1/2 slot |
|
|
Server side |
Client interface |
10×SFP+ 10G + 1×QSFP 100G ports (max 40×10G + 4×100G per chassis) |
|
|
Type |
Supports 10GE/OTU2 Supports 100GE/FlexE Unaware |
|
|
Ethernet Monitoring |
RMON: Packet/byte counts, port utilization, CRC errors |
|
|
Telemetry |
Ethernet performance, optical module power,bias current、 |
|
|
OAM |
Supports LLDP, latency measurement, loopback, and ALS Supports inserts Local Fault code to downstream sideways when Ethernet input loss or WDM side failure Supports transparent transmission of Local Faults and Remote Faults |
|
Line side |
Net interfaces |
1×200G CFP2 DCO coherent module (max 4×200G per chassis). |
|
|
Modulation |
200G:16QAM or QPSK |
|
|
FEC |
200G:SD-FEC |
|
|
Tunable Wavelength |
191.3–196.1 THz, adjustable 75/100 GHz spacing |
|
|
Laser Power |
Adjustable from -5 to 0 dBm (0.1 dB step). |
|
|
Telemetry |
Transceiver power, bit error rate (Pre-FEC), laser bias current, laser operating temperature, etc |
|
|
OAM |
Loopback and delay measurement |
Optical Layer Board
| Card | Specifications | |
|
OA/OLA |
1/2 slot. Built-in BA and PA Number of channels: 48CH@100Ghz Wavelength: 1528.38~1567.54nm EDFA amplifier Gain:15~25dB(OLA),22~35dB(OA/OLA) Maximum output optical power of a single wavelength: 4dBm Maximum output optical power: 21dBm(The whole life cycle) Supports In-band OSC Supports VOA Supports MON |
|
|
WSS |
1/2 slot. Built-in BA and PA 9D wavelength scheduling Supports In-band OSC Supports VOA Supports MON N*12.5GHz (4≤N≤12) Wavelength: 528.38~1567.54nm Insertion loss ≤7.5dB, Isolation >25dB. |
|
|
Single/Double OP |
1/4 slot. Supports single/dual optical channel/multiplex section/line protection. Supports manual and automatic mode Supports power-down, matte locking Wavelength:1528.38~1567.54nm TX Insertion loss ≤4dB RX Insertion loss≤1.5dB Input range:-25~+21dBm Relative threshold setting range: 3~8dB Absolute threshold >-20dB |
|
|
Clock Card |
Supports 1588v2 clock synchronization |
|
|
48Channel MUX/DEMUX |
48CH: 100GHz spacing (191.4–196.1 THz). |
|
|
96Channel MUX/DEMUX |
96CH: 50GHz spacing (191.35–196.1 THz). |
|
Chassis Specifications
|
Dimensions |
440×514×88mm (W×D×H) 2U height, 600mm/19-inch rack compatible |
|
Power Input |
AC 220V (100–240V) DC -48V (-36–-72V) HVDC 240V (192–288V). |
|
Operating environment |
Operating temperature: 0°C ~+40°C Operating humidity: 5%~85%, non-condensing Storage temperature: -40°C~+80°C Storage humidity: 5%~95%, non-condensing |
|
Management |
Supports Console,Telnet, SSH 2.0, Web UI, SNMP/NETCONF. |
